| Customization: | Available |
|---|---|
| Application: | Underground |
| Voltage: | Low and Medium Voltage Cable |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
These are low voltage (0.6/1 kV) single-core electrical cables with a plain annealed copper conductor, PVC (polyvinyl chloride) insulation, and no metallic armour. Designed for use in power and control circuits, these cables are widely used in fixed installations where mechanical protection is not required from the cable itself.
These cables are suitable for:
Fixed installations in conduits, ducts, trunking, or control panels
Power distribution, lighting, and control wiring
Use in indoor and outdoor settings (with protection)
Industrial and commercial buildings
Not suitable for direct burial or mechanically aggressive environments without additional protection
The cable is designed to comply with:
IEC 60502-1: Power cables with extruded insulation for rated voltages from 1 kV to 3 kV
IEC 60228: Conductors of insulated cables (Class 1: solid, Class 2: stranded)
IEC 60332-1: Flame retardant test for a single insulated cable
Optional (as per project spec):
IEC 60754: Halogen acid gas test (if LSZH variants are required)
IEC 61034: Smoke density test
| Component | Description |
|---|---|
| Conductor | Copper, solid or stranded (Class 1 or Class 2 per IEC 60228) |
| Insulation | Extruded PVC (Polyvinyl Chloride), Type PVC/A or PVC/C depending on thermal class |
| Core | Single-core; core identification via color or printed markings |
| Armour | None - unarmoured |
| Outer Sheath | Not applicable (PVC insulation acts as protective layer in most cases) |
Voltage Rating: 0.6/1 kV (600/1000 V)
Maximum Conductor Temperature: 70°C (standard PVC); 160°C under short circuit (5 sec)
Minimum Bending Radius: 8-12 × cable diameter (depending on installation type)
Specification
Packing Company Profile
){kind=link}