0.6/1 Kv Multi-Core Cables, XLPE Insulated, Unarmoured with Aluminum Conductor Na2xy, XLPE Cable

• Customization: Available
• Application: Underground
• Voltage: Low and Medium Voltage Cable
• Model NO.: NA2XY(YJLV)
• Current: AC Cable
• Insulation Material: XLPE
• Sheath Material: PVC
• Material Shape: Round Wire
• Wire Core Material: Aluminum
• Certification: ISO
• Model: Na2xy(Yjlv)
• Brand: Ees Cable
• Transport Package: Rolls/Drums
• Specification: AWG MCM MM2
• Trademark: EES CABLE
• Origin: China
• HS Code: 8544492100
• Production Capacity: 500000m/Month

Product Description

0.6/1 kV Multi-core cables, XLPE insulated, tape armoured with aluminum conductor IEC 60502-1

Description

These cables are low voltage (LV) power cables rated at 0.6/1 kV (600/1000 volts), consisting of aluminum conductors, cross-linked polyethylene (XLPE) insulation, and a polyvinyl chloride (PVC) outer sheath. The multi-core configuration means they contain multiple insulated conductors grouped under a common sheath.

They are used in fixed installations for power transmission and distribution, offering a cost-effective alternative to copper while maintaining good thermal and electrical performance.

 

Application

These cables are suitable for:

• Indoor and outdoor fixed installations

• Underground installation with mechanical protection (e.g., ducts or direct burial with sand bedding)

• Power supply and lighting in:

  • Industrial installations

  • Commercial buildings

  • Power stations and substations

• Areas where weight and cost reduction is important, due to aluminum being lighter and cheaper than copper

 

Standards

The cables are manufactured in accordance with the following international standards:

• IEC 60502-1: Power cables with extruded insulation for rated voltages 1 kV and 3 kV

• IEC 60228: Conductors of insulated cables (Class 1: solid, Class 2: stranded)

• IEC 60332-1: Flame retardant test for a single vertical insulated wire or cable

• IEC 60754 / IEC 61034 (if applicable): For low smoke and halogen content variants

 

Construction

Component	Description
Conductor	Aluminum, solid (Class 1) or stranded (Class 2) to IEC 60228
Insulation	Cross-linked polyethylene (XLPE), rated for 90°C continuous operation
Core Identification	Color-coded or numbered according to local or IEC requirements
Assembly	Insulated cores are twisted together with optional fillers and binding tape
Inner Sheath (optional)	May have an extruded or taped bedding layer for mechanical protection
Outer Sheath	Extruded PVC, usually black, UV and moisture resistant

 

 

Typical Technical Parameters

• Rated voltage: 0.6/1 kV

• Max conductor temperature: 90°C normal / 130°C short circuit (5 sec)

• Flame retardant: Complies with IEC 60332-1

• Installation: Fixed installation in air, ducts, or underground
  
  
  Speciifcation
  Packing
  Company Profile